Gear whoring


My apologies guys the site has been very neglected, I don’t have much time for it anymore sadly. No the new site doesn’t work but this will stay online and I’ll try respond to any questions.


6 responses

  1. Andrea

    Hi Becky! I bought components for “flange mod” today; but I don’t understand if you replaced the original switch or not. Pls, let me know…

    October 2, 2015 at 11:05 pm

    • Hiya Andrea.
      I didn’t but my small clone was true bypass when I bought it. If you have a 3pdt inside you should be okay. If not you will have to replace it otherwise it’ll mess with your dry signal.

      October 3, 2015 at 7:52 am

      • Andrea

        Ok, I have 3PDT (there are 9 pin total…).
        So, the existing wires (already connected to the switch) remain as they are, right?

        October 3, 2015 at 2:44 pm

    • Yep =) thanks

      October 3, 2015 at 4:25 pm

  2. Andrea

    Hi Becky, in the pic “Small Clone Flange mod” is it possible that the view of PCB and switch are inverted? I did connections how show in the pic, but I think I exchanged left and right side of the switch…

    October 5, 2015 at 12:10 pm

    • Hiya Andrea
      Not sure what your asking here. The PCB is a top view of mine. It’s possible the newer ones have a different layout.
      It shouldn’t matter which side of the switch you use as long as everything is correct vertically.
      Send us some pics if you get stuck.

      October 5, 2015 at 6:09 pm

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s